Transport, offloading, setting up
4
________________________________________________________________________________________
_______________________________________
4/1
4.1
General instructions
When the machine arrives please check both the packaging and the machine itself.
Note down any damage in the presence of the forwarding agent; if the machine
proves to be damaged in any way not recorded in the forwarding agent’s documents,
we must assume that the machine was damaged on site, which automatically rules
out any claim for damages.
4.2
Space requirement
Please refer to the Specifications chapter for the machine dimensions.
Please ensure when selecting the location site that it offers good accessibility to the
machine from all sides.
Choose the machine location with a clearance between the side of the unit and the
wall that allows the safety hood to be opened, and adjustment and tool resetting
work on the units to be performed without hindrance. Select the clearance on the
intake and discharge sides and on the lengthways operator’s side on the basis of
your biggest possible workpiece.
4.3
Setting up area
No foundation is necessary when the setting up area has a sufficient load-bearing
capacity. The setting up area must be flat to allow levelling of the machine.
4.4
Sensitivity
When moving the unit, particular care must be exercised to prevent damage due to
rough handling or carelessness when loading and offloading.
Depending on the type and duration of transport, appropriate transport safety
devices are provided.
During transport, condensate formation due to high temperature fluctuations must be
avoided, as well as all knocks.
The machine/unit itself must be treated with the usual care.
4.5
Ambient conditions
The temperature in the operating area should be at least 10
o
c to ensure consistent
operation of the pneumatic/hydraulic components.
4.6
Transport routes
Check the load-bearing capacity of the floors along the transport routes. The
doorways must be at least 20 cm wider than the machine units.
Summary of Contents for Revolution 180
Page 1: ...Operating Manual...