Transport, offloading, setting up
4
________________________________________________________________________________________
_______________________________________
4/2
4.7
Interim storage
If interim storage of this machine/unit is necessary directly after delivery, it must be
stored carefully at a protected spot, and also covered properly to keep out dust and
moisture.
4.8
Cleaning
When the transportation time is greater than 2 weeks, the machine/unit is supplied
with a preservative coating on its bright metal parts that will protect them for one
year. If storage is for longer than this period, renewal of the preservative coating is
necessary.
Clean the bright parts with diesel of paraffin and a soft cloth.
Do not use petrol or thinners! Danger of explosion!
4.9
Transport from packaging to location
4.9.1 Transport means
This machine is delivered partially disassembled and in a container for overseas
delivery.
Please provide suitable handling equipment for offloading and conveying the
machine to the storage area or assembly location. Please refer to the enclosed
order sheet for the load-bearing capacities of the handling equipment.
A fork-lift or crane must be used, and lift trucks or conveyor rollers (reinforced types)
are also suitable for conveying the machine to its location.
Please have the transport routes cleared before the machine is assembled and
commissioned, so that the whole procedure can be completed without hitches.
4.9.2 Offloading
When shipped in a container, it is first necessary to pull the machine from the
container. This can be done using a crane, forklift or similar.
The machine should first be untied. It is fixed in the container using 2 x 2500kg tie
down strops (4) Fig 2. These are looped through the horizontal cross supports on
each end of the machine and tied out to each corner hook point in the container .
This provides lateral and fore – aft location for the machine during transportation.
(The reverse process should be followed if re-transporting the machine).
In addition, the machine has 4 guide bars (1) Fig 1 (one on each corner of the
machine) which guide the machine into and out of the container and also prevent any
lateral movement of the machine during transportation in the container.
DANGER !
Summary of Contents for Revolution 180
Page 1: ...Operating Manual...