Assembly
5
________________________________________________________________________________________
_______________________________________
5
-
11
5.2.1.8 Fitting edgeband coil support
The edge-band coil support (42) is fixed to the side of the cover guard for the head
using the screw at point (43).
Run the pneumatic hoses which protrude from the side of the cover guard, through
the cable ties and connect as per the pictures below. The hoses are 2 different sizes
(4 and 6mm) so cannot be confused when installing.
43
42
44
45
46
Summary of Contents for Revolution 180
Page 1: ...Operating Manual...