Assembly
5
________________________________________________________________________________________
_______________________________________
5
-
16
It is possible to move forwards and backwards through the wiring and pneumatic
drawings using the forward key (21) and back (20)
Check both X (+/-) and Y (+/-) limit switches
Thus it is possible to activate the switches manually or by pushing the Y arm onto the
respective limits to check their function.
IMPORTANT!!!
This check must be made prior to performing a GENERAL
SET.
5.3.4 Testing axis counting direction.
The counters are tested by viewing the X axis counter on the control screen
(refer
5.2.1.5).
When the head is pushed (manually) all the way left (viewed from the front)
onto the negative limit switch, S33, the counter will automatically zero.
Now by pushing the machine along the machine to the right, the counter should be
counting up. By running the machine all the way to the end of the machine in the
positive direction until it just activates the positive microswitch, take the reading from
the control screen.
21
20
18
19
Summary of Contents for Revolution 180
Page 1: ...Operating Manual...
