Run
9
________________________________________________________________________________________
_______________________________________
9
-
35
9.2 Commencing a cycle
9.2.1 Setting vacuum cups and lead –in and lead – out pods.
The machine can operate in single or pendulum mode. When in single mode, the vacuum
systems operates as one large field 3550mm x 1830mm. The vacuum control switches at
each end of the machine perform the same function of raising the panel lifters and
switching on the vacuum (it does not matter which switch is operated).
The worktables is divided into two fields L (944) and R (945). L is at the left hand end of
the machine and R is at the right when in Pendulum operation. In Single field operation,
the machine bed is one large field and both L and R can be placed anywhere within the
bounds of the field.
When in pendulum mode, the vacuum field is separated into two fields and the control
switches only activate the field adjacent. The modes Single or Pendulum are selected
from the control screen by modifying the field (941).
The Vacuum pods (942) are able to be placed anywhere on the worktable (947) so as to
support the workpiece. The hoses from the vacuum pods are plugged into the couplings
on each end of the worktable and are switched via the control switch (945).
The vacuum pods are automatically locked in position when the vacuum is turned on.
926
993
933
950
951
941
944
945
Summary of Contents for Revolution 180
Page 1: ...Operating Manual...