background image

14

TWO YEAR LIMITED WARRANTY PROGRAM

This limited warranty program is the only one that applies to this product, and it sets forth all the

responsibilities of Vector Manufacturing, Ltd., regarding this product. There is no other warranty,

other than those described herein.

This Vector Manufacturing, Ltd. product is warranted, to the original purchaser only, to be free of

defects in materials and workmanship for two years from the date of purchase without additional

charge.  The warranty does not extend to subsequent purchasers or users. Vector Manufacturing, Ltd.

will not be responsible for any amount of damage in excess of the retail purchase price of the product

under any circumstances. Incidental and consequential damages are specifically excluded from cov-

erage under this warranty.

This product is not intended for commercial use. This warranty does not apply to accessories or

damage to units from misuse or incorrect installation. Misuse includes wiring or connecting to im-

proper polarity power sources.

RETURN/REPAIR POLICY: Defective products, other than accessories, may be returned postage

prepaid to Vector Manufacturing.  Any defective product, other than accessories, that is returned to

Vector Manufacturing within 30 days of the date of purchase will be replaced free of charge. If such

a product is returned more than 30 days but less than two years from the purchase date, Vector

Manufacturing will repair the unit or, at its option, replace it free of charge.

If the unit is repaired, new or reconditioned replacement parts may be used, at Vector Manufacturing’s

option. A unit may be replaced with a new or reconditioned unit of the same or comparable design.

The repaired or replaced unit will then be warranted under the terms of the remainder of the warranty

period. The customer is responsible for the shipping charges on all returned items after 30 days.

During the warranty period, Vector Manufacturing, Ltd. will be responsible for the return shipping

charges.

LIMITATIONS: This warranty does not cover accessories, bulbs, fuses and batteries, defects resulting

from normal wear and tear (including chips, scratches, abrasions, discoloration or fading due to

usage or exposure to sunlight), accidents, damage during shipping to our service facility, alterations,

unauthorized use or repair, neglect, misuse, abuse, failure to follow instructions for care and mainte-

nance, fire, flood and Acts of God.

If your problem is not covered by this warranty, call our Technical Support Department at

(954) 584-4446 or toll free at 866-584-5505 for general repair information and charges if

applicable. You may also contact us through our website at www.vectormfg.com.

STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not allow limitations

on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential

damages, so the exclusions or limitations stated herein may not apply. This warranty gives the pur-

chaser specific legal rights; other rights, which vary from state to state, may apply.

TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Vector Manufacturing

Technical Support by telephone, fax or mail. We suggest that you keep the original packaging in case

you need to ship the unit. When returning a product, include your name, address, phone number,

dated sales receipt (or copy) and a description of the reason for return and product serial number.

After repairing or replacing the unit, we will make every effort to return it to you within four weeks.

WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Vector

Manufacturing. Enter “VEC021APC” as Model and Jump-starter/compressor/12VDC power supply

as “Product Type”. All Vector Manufacturing, Ltd. products must be registered within (30) days of

purchase to activate this warranty. Mail the completed registration form, along with a copy of the

original sales receipt to:

ATTN.: CUSTOMER SERVICE / VECTOR MANUFACTURING, Ltd.

4140 SW 28th Way, Ft. Lauderdale, FL 33312

PH: 954-584-4446 • TOLL FREE: 866-584-5504 • Fax: 954-584-5556.

You may also contact us at our web site www.vectormfg.com.

WARRANTY MUST BE PURCHASED WITHIN 30 DAYS OF PRODUCT PURCHASE DATE.
WARRANTY IS NON-TRANSFERABLE AND NON-REFUNDABLE.

Vec021APC manual 10/02

12/3/02, 10:57 AM

14

Summary of Contents for Start-It VEC021APC

















Reviews: