VECTRIX VX-2 SERVICE MANUAL
Version 1.0/July 2011
VECTRIX, LLC
SECTION B-1: FRONT FAIRING
To protect the front fender, put plastic wrap or other soft
material onto the fender
Unscrew the 6 Phillips screws 1 to 6 in order as seen in
the picture with a Phillips screwdriver PH2
Remark:
While loosening screws 7 and 8 hold the front fairing
otherwise it drops down and could break!
Remark:
While loosening screws 7 and 8 hold the front fairing
otherwise it drops down and could break!
To unplug the headlight assembly
,
hold the front fairing
and loosen all the connectors of the headlight
To reassemble after unplugging the headlight assembly,
please be sure the clamp nuts are in the correct position
Remark:
For assembling the Front Fairing, please make sure the attachment points are in the right
position and no edge is protruding. Insert the screws slightly and if all screws and the
fairing are in the correct positions, then tighten them fully.
See also the last picture in the next Section for the correct position of the clamp screw.
1
4
5
8
7
6
3
2
https://www.motorcycle-manual.com/
Summary of Contents for VX-2
