70
V EC T RON POS MOBIL E X L
6 . 3. 2. Installing a wireless network
Your Vectron dealer can install the wireless network for
you. Read the following hints and contact your Vectron
dealer in case of questions and requirements concerning
installation, programming and configuration.
The MobileXL POS system can connect to wireless net-
works in infrastructure mode and in ad hoc mode. In in-
frastructure mode an access point has to be available and
configured in order to use a wireless network. The access
point rules the communication between devices in wireless
networks. In ad hoc mode the MobileXL POS system estab-
lishes a direct connection to a device like eg a printer. To
this printer you have to connect a WiFi module, which you
can purchase as accessory.
NOTICE
a
External access to your data
X
Do not use uncoded network
connections
X
Data transferred in the network
has to be encoded
X
Have the encryption installed by
your Vectron dealer in any case to
protect your data from external
access
• The access point antenna, to which the MobileXL POS
system sends data, should be mounted at least two
metres above ground to guarantee that the radio signal
between MobileXL POS system and access point is of
good quality.
• The access point antenna must be adjusted in such a
way that the access point can receive radio signals of
the MobileXL POS system from the complete radius of
the operator.
Summary of Contents for POS Mobile XL
