2.Preparation for work and scale maintenance :
Before start using the scale, check whether the set is full. Check for mechanical
damages which may have occurred during transportation. For the right functioning
of the scale it is necessary to be placed on stable and flat surface; the four
adjustable feet are used to level the scale. During the leveling watch the mounted in
the down left angle bubble-level. After turning the scale on wait 10 minutes before
starting to use it.
Attention!
1. The scale is a precise instrument. Please, place it on flat surface and avoid serious
hits. Loads over the maximum capacity can damage the load cell permanently. Avoid
placing it on vibrating surfaces and close to sources of strong electro-magnetic fields;
. Keep the scale in airy and dry place; avoid leaving it under direct sunlight;
3. Check the functionality of the display during the automatic testing of the scale
. Do not use chemical and abrasive dissolving agents for cleaning it. Please, clean
d letting water into it;
se sharp objects for this
2
after turning the power on;
4
the scale with wet cloth but avoi
5. Do not push the buttons too strongly and do not u
purpose.
3.Functions of the keys:
Key Function
Zero setting.
Set and remove Tare.
Enter/return to the main menu.
Enter in selected sub-menu. Adjustment/parameter conformation.
Menu up.
Menu down.
Input of the digits from 0 to 9.
Input of two zeroes.
Add the “Price to pay” from the last measure to the current account.
Substract the “Price to pay” from the last measure from the current account.
the current account.
Displays information about the number and the cost of the added products to
Clear the current account.
Set and confirm PLU number.
Print the data from the current measure on label printer.
Clears the entered price.
