4. Operation with the scale in weighing mode:
4.1. Turn on and Turn off
- Turning on and turning off is done by the
On ff s
is on the right at the bottom of the case. First the
ind a n
he model and the
software version. Then the scal
ay shows:
/O
ic
witch, which
tio test starts, then for short the display shows t
e is ready to work and the displ
- Turning on and turning off
of the backlight is done by Back Light On/Off switch, which is on the left at the
bottom
4.2. Turn on and Turn off of the backlight
side of the case.
4.3. Zero setting
– If there is some minimal reading on the display, it can
be zeroed by pressing
key.
4.4. Work with tare
– After placing the package (tare) on the pan, press
key. Readings on the display is zeroed and the indicator „net weight“ lights
up. This mean that next readings will be net weight. To remove tare, unload the
scale. The display will show the weight of the tare with „-“ and the indicator
„tare“ lights up. By pressing TARE key the scale is zeroed again.
4.5. Weight measuring
– The item to be weighted is placed on the scale
pan; the first line of the display shows th measured weight. The weight data are
considered correct, when the indicator for stable reading lights up.
e
