- Entering the submenu Bat, the display shows voltage of the built-in
rechargeable battery in Volts.
- Entering the su
nu Fin
bme
e, the display shows the measured weight
in higher resolution. In this mode all data transmission over the serial interfaces
is forbidden.
- In this submenu, a protocol for connection with the first serial
interface is selected. The sustained protocols are:
OFF – the port is turned off;
Pr1 – Protocol VEDIA with continuous weight transmission;
ission after
Pr3 – Protocol for “Datecs” cash-registers;
cash-registers produced by “Zavod
Pr2 – Protocol VEDIA with a single time weight transm
external command or pressing key Enter;
Pr4 – Protocol for connection with
Electronica”, “ZEKA”, “Orgtechnika”;
Pr5 – Protocol for “ZIT”cash-registers.
fter each change of the protocol settings, the scale is restarted.
A
- In this submenu, a protocol for connection with second serial
nterface is selected. The susta
i
ined protocols are:
OFF – the port is turned off;
Pr1
nge of the protocol settings, the scale is restarted.
– Protocol VEDIA with continuous weight transmission;
Prn – Protocol for label printer.
After each cha
- In the submenu, an operating mode for the backlights of the two
LCD displays is selected. Available working modes:
1.OFF – Backlight is turned off each time the readings for the weight is zero
(batter
2.On –
y saving mode);
Backlight is always on.
- In the submenu the user has access to the following service mode
ons:
functi
l Converter. The display shows
themperature in
degr
1. ADC – Test of the Analog-to-Digita
direct readings from the ADC;
2. t
o
C – Thermometer. The display shows the ambient
ee Celsius;
3. Ver – Version. The display shows the current version of the scale
software;
