SC-200912-PS-A (v5.12 - 20120913)
©2010/2012 Veebeam Ltd. All rights reserved. Veebeam and the Veebeam logo are trademarks of Veebeam Ltd.
Other brands and product names are trademarks or registered trademarks of their respective holders.
29 of 53
Veebeam configuration (Settings/Preferences)
You may wish to customize your Veebeam for your personal preferences. The options you can alter
are shown below.
Windows settings
The Windows settings can be accessed from the Veebeam icon right
click menu.
Note: The settings option is only available when a USB antenna is
connected and it is connected to a Veebeam box.
•
Screen Size – Sets the amount the video from Veebeam is shrunk
when sent to the TV. Used on TVs where the video from Veebeam
goes beyond the edges of the TV screen.
•
TV Aspect Ratio – Set this to the aspect ratio of your TV (see your
TV’s user manual for more details)
•
Composite Output – Sets the format for the composite video output. In
general, North America uses NTSC while European countries typically
use PAL
•
HDMI Mode –Sets the output scan frequency, mode and resolution of
the HDMI connection between the Veebeam box and TV. Check your
TV owner’s manual if you are uncertain of the TV’s supported modes.
Windows Settings
Dialogue