XSTREAM 2.4 GHZ WIRELESS MODEM
For use with VEEDER-ROOT EMR³ DATALINK
INSTALLATION INSTRUCTIONS
Manual 577013-894, Rev. B
Page 6 of 14
FOR XSTREAM 2.4 GHZ OFFICE USB MODEMS
XSTREAM OFFICE KIT INSTALLATION:
1. Screw the antenna into the modem and hand tighten. The antenna should point upwards.
If using the High Gain Antenna, it connects to the same location.
2. Insert the power supply cable connector into the modem completely, and attach the USB
CABLE
3. Plug the power supply into a normal 110 volt outlet, or with the proper non-Americas Plug.
The three green signal lights on the modem will be lit.
4. The modem can sit on a desk, but for best results it should be place as high as possible. Or,
the modem can be attached with Velcro, or screws or bolts using the tabs on the modem to a
surface. A high gain antenna will enhance the modems capability.
5. Attach the other end of the USB Cable to a USB port on your computer.
3 Green
Lights when
power
connected.
Power
supply
connection
