Operation of the System
Typical Dispensing Examples
57
1. Operator selects the price of $2.00 for the delivery and presses ENTER to accept (no Preset Icon displayed).
2. Presses PRESET button to display the Preset countdown value (No Preset Icon displayed).
3. Presses the NEXT button to set the Currency Preset Of $200.00 and presses ENTER to accept the value
(Preset Icon turns solid).
4. Starts delivery by pressing START Button. If more than one product, select product, then press ENTER.
5. Operator begins dispensing. The Preset Field displays the countdown value of the $200.00 less the currency
value dispensed (Preset Icon remains solid).
6. Presses MODE to go to Volume Mode and presses PRESET button to display the Preset countdown (Preset
Icon remains solid; value displayed will be equal to100 less volume dispensed).
7. Pressing the NEXT button to display current volume preset value (Preset Icon remains solid). The Preset
volume value equivalent displayed will be 100.
8. The Operator changes the Preset value to 200 gallons by entering 200 and pressing ENTER to accept (Preset
Icon remains solid). Display shows the new countdown number of 200 less the amount dispensed.
9. Presses MODE to display currency price ($2.00).
10.Pressing the PRESET button displays the countdown value in currency. The equivalent preset currency value
displayed is $400.00 less value of amount dispensed (The Preset Icon remains solid).
11.Presses MODE button to display a flow rate of in gallons/min. (optional).
12.Presses MODE button to display Volume then PRESET button to display the preset countdown of 200 less
the amount dispensed (Preset Icon remains solid).
13.200 gallons is dispensed and the system stops flow.
14.The
button is pressed to display Preset Disable and then ENTER to disable (Preset Icon begins flashing
and flow is allowed to continue, while recording negative numbers past the preset value).
15.Operator "tops" the tank off at 210 gallons (Preset Icon continues flashing).
16.Presses ENTER (Preset Icon turns solid) and system stops flow. Preset display shows -10 gallons.
17.Presses FINISH to print the ticket (210 gallons @ $2.00 per gallon, $420.00 +taxes = $420.00+ tax).
Typical Dispensing Examples
The following scenarios outline the steps the operator may take to dispense product. The two basic methods of
delivery are Volume and Currency. They are introduced into the default mode selected in set up for pre-dispense.
The operator selects the options appropriate for that mode and presses start to begin the actual dispensing. If
multiple products are set up they choose from the available products. If a multiple delivery is desired they hold the
START button for more than 1 second to place them in the Multiple Delivery State. Dispensing of fuel may begin.
After the preset is reached or the desired amount of fuel is dispensed the operator presses the FINISH button to
end the delivery. If the preset is reached and the user wishes to "top off " the tank then the preset may be disabled
or reset to accomplish the dispensing of additional product.
DISPENSING VOLUME WITHOUT PRESET
1. In Volume Mode, press START button to initiate delivery (if Display Head is configured for more than one
product, you must then select a product first and press ENTER).
2. Deliver Product to desired amount.
3. Press FINISH button to print Volume Ticket.
