9
Connect the PC to the ProtoNode
Connecting to the Gateway via Ethernet
Connect a Cat-5 Ethernet cable (straight through or cross-over) between the local PC and ProtoNode.
Figure 8. Ethernet Port Location
CHANGING THE SUBNET OF THE CONNECTED PC
The default IP Address for the ProtoNode is
192.168.1.24
, Subnet Mask is
255.255.255.0
. If the PC and
ProtoNode are on different IP networks, assign a static IP Address to the PC on the 192.168.1.xxx network.
For Windows 10:
•
Find the search field in the local computer’s task bar (usually to the right of the windows icon
) and type in
“Control Panel”.
•
Click “Control Panel”, click “Network and Internet” and then click “Network and Sharing Center”.
•
Click “Change adapter settings” on the left side of the window.
•
Right-click on “Local Area Connection” and select “Properties” from the dropdown menu.
•
Highlight
and then click the Properties button.
•
Select and enter a static IP Address on the same subnet. For example:
•
Click the Okay button to close the Internet Protocol window and the Close button to close the Ethernet
Properties window.
Ethernet Port
