10
Setup Web Server Security
Navigate to the IP Address of the ProtoNode on the local PC by opening a web browser and entering the IP
Address of the ProtoNode; the default Ethernet address is 192.168.1.24.
If the IP Address of the ProtoNode has been changed, the assigned IP Address can be
discovered using the FS Toolbox utility. See “Lost or Incorrect IP Address” on page 20 for
instructions.
Login to the FieldServer
The first time the FieldServer GUI is opened in a browser, the IP Address for the gateway will appear as untrusted.
This will cause the following pop-up windows to appear.
When the Web Server Security Unconfigured window appears (see Figure 9). Read the text and choose whether
to move forward with HTTPS or HTTP.
Figure 9. Web Server Security Window
NOTICE
Web Server Security Unconfigured
Web server security has not yet been configured for the gateway. You have the
option to continue with HTTP, which is not secure, or rather to use HTTPS.
When using HTTPS without an internet connection your browser will issue a
security warning.
When using HTTPS with an internet connection your browser will redirect you
to a trusted domain. i.e.,
https://192.168.1.24.gw.fieldpop.io
for IP address
192.168.1.24
.
Use HTTPS (Recommended)
Continue with HTTP
