25
Additional Information
Update Firmware
To load a new version of the firmware, follow these instructions:
1. Extract and save the new file onto the local PC.
2. Open a web browser and type the IP Address of the FieldServer in the address bar.
a. Default IP Address is 192.168.1.24
b. Use the FS Toolbox utility if the IP Address is unknown (see “Lost or Incorrect IP Address” on page 20)
3. Click on the “Diagnostics & Debugging” button.
4. In the Navigation Tree on the left hand side, do the following:
a. Click on “Setup”
b. Click on “File Transfer”
c. Click on the “General” tab
5. In the General tab, click on “Choose Files” and select the web.img file extracted in 1.
6. Click on the orange “Submit” button.
7. When the download is complete, click on the “System Restart” button
Mounting
The ProtoNode can be mounted using the DIN rail mounting bracket on the back of the unit (see Figure 25).
Figure 25. ProtoNode DIN Rail Mount
DIN Rail
Bracket
