17
Using QuickServer Web Configurator To Setup The Gateway
Ethernet Network - Setting IP Address For Field Network
Ethernet Network - Setting IP Address For Field Network
•
After setting a local PC to the same subnet as the QuickServer (See “Connect The PC To QuickServer Via The
Ethernet Port” on page 12., open a web browser on the PC and enter the IP Address of the QuickServer; the
default address is 192.168.1.24.
•
The Web Configurator is displayed as the landing page (see Figure 14).
•
To access the FS-GUI, click on the “Diagnostics & Debugging” button in the bottom right corner of the page.
Figure 14. Web Configurator Screen With Active Profiles
•
From the FS-GUI landing page, click on “Setup” to expand the navigation tree and then select “Network
Settings” to access the IP Settings menu (see Figure 15).
12
