Connecting Probe/Sensor Wiring to Consoles
TLS-
3
50/ProMax/EMC Consoles
59
Grounding Probe and Sensor Shields
Connect probe and sensor cable shields to ground at the console only. Do not ground both ends of the shield.
CIRCUIT DIRECTORY
A circuit directory is adhered to the inside of the right-hand door. It should be filled out by the installer as the
module’s connectors are being wired.
The following information should be recorded for each slot:
•
Module Type: record what type of module has been installed in the slot, e.g., Probe/Thermistor Interface Module.
•
Position Record: record the physical location and/or type of device wired to each terminal of the module
connector in the slot, e.g., Tank 1.
In the example directory shown in Figure 57, slot 4 contains a Probe/Thermistor Interface Module. Position 1 on
the connector receives the + and – wires from the probe in Tank 1, position 2 from the probe in Tank 2, etc. Since
this system has five tanks, a second Probe/Thermistor Interface Module is installed in slot 5 and its connector
position 1 receives the wires from the probe in Tank 5.
Positions on each module are numbered and each connector terminal is identified with the acceptable input. There
are eight positions for each slot even though some modules accept fewer devices.
Figure 57. Modular Console System Circuit Directory
MODULE TYPE:
POSITION RECORD:
1
2
3
4
5
6
7
8
MODULE TYPE:
POSITION RECORD:
1
2
3
4
5
6
7
8
MODULE TYPE:
POSITION RECORD:
1
2
3
4
5
6
7
8
MODULE TYPE:
POSITION RECORD:
1
2
3
4
5
6
7
8
MODULE TYPE:
POSITION RECORD:
1
2
3
4
5
6
7
8
MODULE TYPE:
POSITION RECORD:
1
2
3
4
5
6
7
8
MODULE TYPE:
POSITION RECORD:
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
MODULE TYPE:
VAPOR
POSITION RECORD:
1
2
3
4
5
6
7
8
1
WELL #1
WELL #2
WELL #3
TA NK 1
- INT
TA NK 1
- SUM
P
TA NK 2
- INT
TA NK 2
- SUM
P
TA NK 3
- INT
TA NK 3
- SUM
P
TA NK 4 - INT
TA NK 4 - SUM
P
INTE R STITIA L
INTE R STITIA L
TA NK 5 - INT
TA NK 5 - SUM
P
PRO B E
TA NK 1
TA NK 2
TA NK 3
TA NK 4
PRO B E
TA NK 5
MODULE TYPE:
POSITION RECORD:
1
2
3
4
5
6
7
8
MODULE TYPE:
POSITION RECORD:
1
2
3
4
5
6
7
8
MODULE TYPE:
POSITION RECORD:
1
2
3
4
5
6
7
8
MODULE TYPE:
POSITION RECORD:
1
2
3
4
5
6
7
8
MODULE TYPE:
POSITION RECORD:
1
2
3
4
5
6
7
8
MODULE TYPE:
POSITION RECORD:
1
2
3
4
5
6
7
8
MODULE TYPE:
POSITION RECORD:
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
MODULE TYPE:
POSITION RECORD:
1
2
3
4
5
6
7
8
9
LINE LEA K INP .
OV E R FILL A LM O UT
M E TE R 1
M E TE R 2
M E TE R 3
M D IM
I/O C O M B O
Power Bay Slots
Intrinsically Safe (IS) Bay Slots
consoles\moduldir.eps
