B-1
Appendix B: Setup Parameters for TLS-300 System - International
The following list of setup parameters is intended for use as a programming guide for the commissioning engineer.
System Setup
Table B-1.
System Setup
Parameter
Default
Set As
Time & Date
08:00 01:01:94
Current Time &
Date
System Units
Metric
Default
System Language
English
As Required
Header Message 1
None
Site Name
Header Message 2
None
Site Address
Header Message 3
None
Site Address
Header Message 4
None
Site Address
Shift Time 1
Disabled
Default
Shift Time 2
Disabled
Default
Shift Time 3
Disabled
Default
Shift Time 4
Disabled
Default
Tank Per Tst Needed Wrn
Disabled
Default
Tank Ann Tst Needed Wrn
Disabled
Default
Print TC Vol.
Enabled
Disable
Temp. Comp. °C
15.6
Default
Stick Height Offset
Disabled
Disabled
Daylight Savings Time
Enabled
Default
H Protocol Format
Height
Default
Security Code
000000
xxxxxx
