7
In-Tank Setup
Product Labels
7-2
Press STEP. If more than one module is installed, the system automatically advances to the TANK CONFIG
message for the next module. Up to 2 modules may be installed. Repeat the steps described above for each
module until you have entered the configuration information (probe positions) for all modules and the system
displays the ENTER PRODUCT LABEL message.
Product Labels
If necessary, press STEP until you see the message:
Enter the type of fuel (e.g., Diesel, Unleaded, etc.) in the selected tank, identified in the second line of the
message. In international installations, the first two characters of the product label will be sent to third party
equipment as a GRADE label, i.e., UL UNLEADED will send “UL.”
To enter the type of fuel in the tank, press CHANGE. Enter an alphanumeric label for any system-compatible fluid
fuel. Press ENTER to confirm your entry. The system displays:
Press STEP to continue.
Product Code
If necessary, press STEP until you see the message:
Enter the alphanumeric code used by a point-of-sale terminal or other external device to identify product for
inventory control purposes.
NOTE: Many point of sale and pump control devices within the United Kingdom use 4* to indicate “Four Star”
premium grade petrol. The asterisk * is entered by pressing the zero key 5 times.
To enter the product code for the selected tank, press CHANGE. Enter the alphanumeric code. Press ENTER to
confirm your entry. The system displays:
Press STEP to continue.
ENTER PRODUCT LABEL
T1:
T1: (Product Label)
PRESS <STEP> TO CONTINUE
T1: (Product Label)
PRODUCT CODE: 1
PRODUCT CODE: X
PRESS <STEP> TO CONTINUE
