TLS-450 Setup and Operation Screens Manual
135
Device
Device
The Auto detection mechanism may further restrict the Comm Device Type choices available to
choose from in case a Device is already available in the slot.
If there is no Device in the slot, then all supported options for that specific slot will be available.
Setting the Device to "None" will also set all the common fields and button icons along the bottom of
screen to their default values thereby marking the entry as removed from the configured list of Comm
Devices (a Save is always needed for the changes to take effect. A message warning will be shown
to the user prior to the save).
Allowable selections: List, None
Default: None
Label
Enter a unique label for the Comm Device.
Allowable selections: Up to 20 alphanumeric characters
Default: Comm Device Identifier and number
Baud Rate
(RS-232/RS-485, Modem Comm Devices)
Allowable selections: 300,600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200
Default: RS-232 = 9600, RS-485 = 9600, Modem = 9600
(H-JBOX, S-SAT Comm Devices)
Allowable selections: 300,600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200
Default: 9600
Data Bits
(RS-232/RS-485, Modem Comm Devices)
Allowable selections: 8 or 7
Default: 7
(H-JBOX, S-SAT Comm Devices)
Allowable selections: 8 or 7
Default: 8
Parity
(RS-232/RS-485, Modem Comm Devices)
Allowable selections: None, Odd, Even
Default: Odd
(H-JBOX, S-SAT Comm Devices)
Allowable selections: None, Odd, Even
Default: None
Stop Bits
(RS-232/RS-485, Modem Comm Devices)
Allowable selections: 1 or 2
Default: 1
