TLS-450 Setup and Operation Screens Manual
326
AccuChart II Diagnostics - Data Sufficiency
This screen lets you view a histogram of the data collected for the tank's calibration. The data in the chart
will be for the current calibration if one is in progress, or for the last completed. The bars depict the
concentration of data collected at different levels of the tank. Ideally you would want collected data (bars)
across all levels of the tank.
When the chart calibration is applied to the tank depends on your 'Update Schedule' field's entry in the
Only tanks that are actively running AccuChart II will have tank buttons on the bottom of the screen.
Data Sufficiency %
This read-only field contains the current percentage of collected calibration data. This percentage is
updated as the data sufficiency approaches the Required Sufficiency % target. This field is updated at
midnight of each day, or after you initiate a
Required Sufficiency %
This read-only field contains the amount of data required to perform a calibration. Once the Data
Sufficiency % achieves the Required Sufficiency % target and the calibration has been performed, the
Required Sufficiency % is raised to a higher level. For example, from 60% to 70%. The tank calibration
