TLS-450 Setup and Operation Screens Manual
51
Device Setup - Type A Sensor
This screen allows you to setup Type A (2-wire) sensors connected to the console. You access each of
your site's Type A sensor setups by touching the desired button at the bottom of the screen.
Configured
Allowable selections: Enabled, Disabled
Default: Disabled
Address
Allowable selections: Choose from drop-down list of available Type A sensors, Not Assigned
Default: Not Assigned
Label
Allowable selections: Up to 20 alphanumeric characters
Default: Blank
Model
Select the sensor's model from the drop down list.
Allowable selections: Discrim. Interstitial, Ultra 2
Default: Discriminating Interstitial
