TLS-450 Setup and Operation Screens Manual
327
will restart and continue until the Data Sufficiency % achieves the upgraded Required Sufficiency %
value. This field is updated at midnight of each day, or after you initiate a
Days Left to Calibration Completion
This read-only field contains the days left in the chart calibration process. The number of days to calibrate
was selected in the Calibration Period field in the
Sufficiency Improvement Action
The 'Sufficiency Improvement Action' field will only appear after one or more of the following warnings
have been posted:
•
Data Too Regionally Concentrated - Schedule more deliveries if insufficient data in top half of
tank. Schedule fewer deliveries if insufficient data in bottom half of tank.
•
Station Too Busy - Temporarily halt dispensing to introduce more idle periods.
The list of possible action messages in the 'Sufficiency Improvement Action' field includes:
•
Stop Dispensing
•
Start Dispensing
•
Schedule Delivery Now
•
Postpone Delivery
Control Buttons (Right side of screen)
Calibrate Now
Touching the 'Calibrate Now' button will let you force a calibration regardless of the current data
sufficiency percentage. The name of the calibration will be 'Last AccuChart'. Pressing ‘Calibrate Now’ will
bring up the 'Confirm Calibrating Now' dialog.
If a calibration is running on the selected tank, the 'Calibrate Now' button will display 'Calibrating'. If
AccuChart II is not collecting data on the selected tank, the 'Calibrate Now' button will be disabled. If a
calibration is running on an unselected tank, the 'Calibrate Now' button will be disabled.
Results of the Calibrate Now procedure will update the 'Data Sufficiency %' and 'Required Sufficiency %'
fields.
