16
Installing Software Features
Before installing a software feature upgrade, perform a system backup using a V-R Backup thumb drive (P/N
332970-004) following the procedure described in “Before Turning Off Power” on page 3.
The V-R Backup thumb drive is different from a V-R Software Upgrade thumb drive - the two
are not interchangeable.
Software Features Installation Procedure
1. Get the USB adapter with the installed feature upgrade iButton from the upgrade kit
2. Insert the USB Adapter into one of the two USB ports in the bottom of the console as shown in Figure 21
below.
Figure 21. Insert The iButton Adapter Thumb Drive Into A USB Port On The Console
3. From the Home Screen, touch the following: Menu>Software Maintenance >Upgrade Features.
You will have to scroll to see Upgrade Features option in Software Maintenance.
4.
Touch the Install Features button to start the installation process.
5.
When you have completed the Upgrade Features procedure, remove the upgrade thumb drive.
6.
From the Home Screen, touch the following Menu > Overview > About and verify that the features in the
upgrade were installed.
7.
With the new software features installed, perform a system backup using the V-R Backup thumb drive
(P/N
332970-00
4
) as discussed in “Before Turning Off Power” on page
The V-R Backup thumb drive is different from a V-R Software Upgrade thumb drive - the two
are not interchangeable.
NOTICE
076-4
NOTICE
NOTICE
