Wiring/Miscellaneous For TLS-IB Consoles W/RS-232 & With & W/O IFSF)
TLS-IB Specifications
4-15
• Veeder-Root RS-232 command protocol format applies. Table 4-3 lists serial commands recognized by the TLS-
IB:
SIGNAL INPUT SPECIFICATIONS
• Up to 8 Veeder-Root Magnetostrictive probes can be monitored.
• Probe data: 0.2 A at 13 volts.
Table 4-2. TLS-IB Serial Interface Connections
J7 Connections
Computer Terminal (DB-25 Connector)
A (receive)
TXD (pin 2)
B (transmit)
RXD (pin 3)
G (signal ground)
GND (pin 7)
Table 4-3. TLS-IB Serial Commands
Command
Description
001
System Reset
002
Clear Power Reset Flag
003
Remote Alarm Reset
201
In-Tank Inventory Report (height, water, and temp
only)
205
In-Tank Status Report
517
Set System Type & Language Flags (ext. lang. set)
601
Set Tank Configuration
62F
Set Mag Probe Float Size
881
Set Communication Port Data
882
Initialize Communication Port Data
902
System Revision Level Report
A01
Probe Type and Serial Number
A02
Probe Factory Dry Calibration Values
A10
Probe Last Sample Buffers
A11
Probe Fast Average Buffers
A12
Probe Standard Average Buffers
