28
5)
A signal wire from each brake lever automatically cuts power to the motor when either brake is being used.
This prevents undue wear to the electric motor.
Your new brakes go through a “Bedding In” period. Which means that after the first 40 to 50 Full stops, they will
wear down to achieve the 100% grip efficiency, resulting in an adjustment needed
Shifting the gears
Your HORSER S1 comes equipped with a Shimano 7 speed gear set (see figure 2). The lower gears are useful for
starting off from a stop or when riding slowly or climbing steep hills. Higher gears are most effective when riding at
speed. The mid gears fit into the space between. As a normal bike, you will get used to using the gear settings that
are most comfortable for your ride and trip.
The twist shifter is located on the right side of the handlebar (see figure1).
The gear shifting system and motor assist are entirely independent; neither affects the other’s performance. Both
work toward the goal of propelling the bike, of course, and their contributions are additive.
Figure 1
Figure 2
Summary of Contents for Horser S1
Page 1: ......
