Vega BS / User Manual
28
Revision 26 of 13 April 2022
Configuration file
global_conf.json
is in the directory LoRa/ – it may contain frequency
band, the gateway ID, IP-address and server ports settings.
Enter the command, containing the required configuration file to change the settings,
for example:
After all changes completed enter the command:
/etc/init.d/lora_watchdog start
Packet forwarder will automatically start with new settings.
To connect the gateway to the server, you must use the UDP port
specified in the server configuration file. On the gateway, the port
configuration is in the global_conf.json file
In the global_conf.json file, the UDP port settings are in the gateway_conf section,
there are server_port_up and server_port_down parameters.
