Vega BS / User Manual
11
Revision 26 of 13 April 2022
SIM CARD INSTALLATION AT THE BS-2.2 AND BS-2.2 LTE
Vega BS-2.2 and Vega BS-2.2 LTE gateways include a GSM (or LTE) module, which is
placed on the main board.
The SIM card must be installed at a temperature not lower than room
temperature. If the device was in low temperatures, then before installing
the SIM card, you must first keep the device at room temperature for
several hours.
The module must be removed manually strictly vertically, observing a uniform load on
the connectors. To remove, do not use auxiliary items such as screwdrivers, scissors, knives,
etc. as levers, as this may damage the device.
