Vega SH-2 / User Manual
15
Revision 06 – 06 July 2020
The menu on the left allows you to switch between the “Simple” and “Expert” modes,
select the device model, connect to the device, or disconnect from it, get, and apply settings.
The application window contains three tabs – Device info, LoRaWAN settings and
device settings.
The language selection menu is in the upper right corner.
CONNECTION TO THE DEVICE
For the connection to the device, perform the following steps:
1.
Connect the USB cable to the device.
2.
Start the "Vega LoRaWAN Configurator" application.
3.
Click the "Connect" button in the menu on the left.
The application automatically recognizes the type of device, and the device selection
menu becomes inactive.
To read the settings from the device, you need to click the "Get settings" button, until
this point the application will display the default settings or from the last connected device.