EN|ENGLISH
2
SAFETY
WARNING!
Carefully read all instructions. Failure to follow all the instructions mentioned
below, can cause electric shock, fire and / or serious personal injury.
1.
Keep your work area clean and well lit. Cluttered surfaces and darkened
room may be the cause of the accident.
2.
Do not use the instrument in an explosive atmosphere, ie, in the pres-
ence of explosive liquids, gases and dust. Power tools create sparks which
may ignite the dust or fumes.
3.
Keep visitors and children away from the place of use of power tools.
Distraction from work can lead to loss of control.
4.
Do not overtax the power cord. Never use the cord to carry the power
tool. Keep the cord away from heat, oil, sharp edges or moving parts. Re-
place damaged cord immediately. Damaged cords increase the risk of
electric shock.
5.
Working with a power tool outdoors, use an extension cord designed for
outdoor use, labeled «WA» or «W». These types of cords designed for
outdoor use and reduce the risk of electric shock.
6.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jeweleiy or
long hair can be caught in moving parts.
7.
Avoid inadvertent inclusion. Make sure that switch is "OFF" before turn-
ing into an outlet.
8.
Remove the key settings or wrenches before turning the tool. The key is
left in the moving parts of the tool may be the cause personal injury.
9.
Use special protective gear for safety. Always wear safety goggles.
10.
Do not use excessive force when operating the tool. Use only a sharp
edged tool. He will perform the job better and safer if will work with the
power to which it was designed.
11.
Disconnect the plug from the power source before you make a setting
change of accessories or tool to keep in storage. Store idle tools in places
inaccessible to children.
12.
Maintain tools. Keep cutting tools sharp and clean. Carefully maintained
tools with sharp cutting parts will not bind and are easier to control.
13.
Check the alignment tool, and seizure of moving parts, breakage of parts
and any other conditions that may affect the operation tool.
