Vega BS/User Manual
30
Revision 15 – 20 November 2018
GATEWAY SETTING UP FOR 3G OPERATION
Gateway BS-2.2 does not required a special setting up for 3G operation,
except the paragraph 3, namely – specify a cellular operator APN
Gateway BS-2 setting up for 3G operation using the terminal program carried out in the
following order:
1.
After connecting to the gateway enter login and password in the PuTTY terminal
window.
2.
Check, that in file nano /etc/ppp/peers/wvdial entered strings highlighted in red:
noauth
name wvdial
usepeerdns
defaultroute
replacedefaultroute
If these strings are not present, then you should to add them.
3.
Check, that in file nano /etc/wvdial.conf entered strings highlighted in red:
; Init1 = ATZ
; Init2=ATQO V1 E1 &C1 &D2 +FCLASS=0
Init1 = AT+CPIN?
Init2 = AT+CGDCONT=1,"IP","internet.beeline.ru"
Modem Type = USB Modem
Baud = 460800
New PPPD = yes
Auto Reconnect = off
Modem = /dev/ttyACM0
ISDN = 0