38
7 Set up with PACTware and other adjustment programs
VEGACAL 69 • Two-wire 4 … 20 mA/HART
31178-EN-200929
Further setup steps are described in the operating instructions manu-
al "
DTM Collection/PACTware
" attached to each DTM Collection and
which can also be downloaded from the Internet. Detailed descrip-
tions are available in the online help of PACTware and the DTMs.
Fig. 25: Example of a DTM view
All device DTMs are available as a free-of-charge standard version
and as a full version that must be purchased. In the standard version,
all functions for complete setup are already included. An assistant for
simple project configuration simplifies the adjustment considerably.
Saving/printing the project as well as import/export functions are also
part of the standard version.
In the full version there is also an extended print function for complete
project documentation as well as a save function for measured value
and echo curves. In addition, there is a tank calculation program as
well as a multiviewer for display and analysis of the saved measured
value and echo curves.
The standard version is available as a download under
www.vega.com/downloads. The full version is available on CD from
the agency serving you.
7.3 Parameter adjustment with AMS™ and PDM
For VEGA sensors, instrument descriptions for the adjustment
programs AMS™ and PDM are available as DD or EDD. The instru-
ment descriptions are already implemented in the current versions of
AMS™ and PDM.
For older versions of AMS™ and PDM, a free-of-charge download is
available via Internet. Move to www.vega.com.
Standard/Full version
Summary of Contents for VEGACAL 69
Page 14: ...14 4 Mounting VEGACAL 69 Two wire 4 20 mA HART 31178 EN 200929 Fig 6 Inflowing medium...
Page 57: ...57 Notes VEGACAL 69 Two wire 4 20 mA HART 31178 EN 200929...
Page 58: ...58 Notes VEGACAL 69 Two wire 4 20 mA HART 31178 EN 200929...
Page 59: ...59 Notes VEGACAL 69 Two wire 4 20 mA HART 31178 EN 200929...
