VEGAPULS 56K
55
Set-up
• If you have carried out adjustments in this
menu window, click to "
Save“.
• If you want to keep these adjustments
without saving the modifications, click to
"
Quit“.
You are again in the menu window "
Outputs“.
Display of measured value
• Click in the menu window "
Outputs“ to the
menu point "
Display of measured value“.
Now the menu window "
Sensor-Display“
opens. Here you can adjust once again the
sensor display.
• Choose "
scaled“, when the display should
indicate your previous adjustments. In the
example a level of 45␣ …␣ 1200 litres would
be indicated.
• Choose "
Volume percent“, when you want
that the level of 45 … 1200 litres is indicated
as percentage value of 0 … 100 %.
• Choose "
Distance“, when the actual dis-
tance to the product surface should be
indicated (in m).
• Choose "
Percent“, when the product dis-
tance of 0,300␣ …␣ 5,850 m should be indi-
cated as percentage value of 0 … 100 %.
With "
Save“ the adjustment is transferred to the
sensor.
• Click to
"Quit“ in the window
"
Sensor-Display“.
• Click to "
Quit“ in the window
"
Outputs“.
You are again in the initial menu window "
In-
strument data parameter adjustment“.
Sensor optimisation
In the menu "
Sensor optimisation“ you can
carry out special sensor optimising adjust-
ments.
Meas. environment
• Choose in the menu window "
Instrument
data parameter adjustment“ the menu point
"
Sensor optimisation“.