16
6 Set up with smartphone/tablet, PC/notebook via Bluetooth
VEGAPULS 63 • HART and accumulator pack
47126-EN-210621
6 Set up with smartphone/tablet, PC/
notebook via Bluetooth
6.1 Preparations
Make sure that the Bluetooth function of the display and adjustment
module is activated. For this, the switch on the bottom side must be
set to "
On
".
1
On
Off
Fig. 7: Activate Bluetooth
1 Switch
On =
Bluetooth active
Off =
Bluetooth not active
The security concept of Bluetooth operation absolutely requires that
the default setting of the sensor PIN be changed. This prevents unau-
thorized access to the sensor.
The default setting of the sensor PIN is "
0000
". First of all you have
to change the sensor PIN in the adjustment menu of the sensor, e.g.
to "
1111
":
1. In the adjustment menu, go to "
Additional adjustments
", "
PIN
"
Note:
The menu item "
PIN
" is only displayed if in the menu "
Setup
", "
Lock/
Unlock adjustment
" the adjustment is released.
2. Change sensor PIN
Activate Bluetooth
Change sensor PIN
