27
6 Set up with the display and adjustment module
VEGAPULS 65 • Foundation Fieldbus
36518-EN-140209
6 Set up with the display and adjustment
module
6.1 Insert display and adjustment module
The display and adjustment module can be inserted into the sensor
and removed again at any time. You can choose any one of four differ
-
ent positions - each displaced by 90°. It is not necessary to interrupt
the power supply.
Proceed as follows:
1.
Unscrew the housing cover
2.
Place the display and adjustment module in the requested posi
-
tion onto the electronics and turn to the right until it snaps in
3.
Screw housing cover with inspection window tightly back on
Removal is carried out in reverse order.
The display and adjustment module is powered by the sensor, an ad
-
ditional connection is not necessary.
Fig. 23: Installing the display and adjustment module in the electronics compart-
ment of the single chamber housing
