40
6 Set up with the display and adjustment module
VEGAPULS SR 68 • 4 … 20 mA/HART two-wire
38294-EN-130624
– Confirm selected menu
– Edit parameter
– Save value
•
[->]
key:
– Presentation, change measured value
– Select list entry
– Select editing position
•
[+]
key:
– Change value of the parameter
•
[ESC]
key:
– Interrupt input
– Jump to next higher menu
The sensor is adjusted via the four keys of the display and adjust-
ment module. The LC display indicates the individual menu items. The
functions of the individual keys are shown in the above illustration.
Approx. 60 minutes after the last pressing of a key, an automatic reset
to measured value indication is triggered. Any values not confirmed
with
[OK]
will not be saved.
6.3 Parameter adjustment
Through the parameter adjustment the instrument is adapted to the
application conditions. The parameter adjustment is carried out via an
adjustment menu.
The main menu is divided into five sections with the following func-
tions:
Setup:
Settings, e.g., for measurement loop name, medium, applica-
tion, vessel, adjustment, signal output
Display:
Settings, e.g., for language, measured value display, lighting
Diagnosis:
Information, e.g. on instrument status, pointer, measure-
ment reliability, simulation, echo curve
Further settings:
Instrument unit, false signal suppression, linearisa-
tion curve, reset, date/time, reset, copy function
Info:
Instrument name, hardware and software version, date of manu-
facture, instrument features
Information:
In this operating instructions manual, the instrument-specific param-
eters in the menu sections "
Setup
", "
Diagnosis
" and "
Additional set-
tings
" are described. The general parameters in these menu section
are described in the operating instructions manual "
Indicating and
adjustment module
".
Adjustment system
Main menu
