3
Quick start
VEGAPULS WL 61 • 4 … 20 mA/HART - two-wire
38061-EN-121011
2
1
0,5 m (19.68
")
5 m
(196.85
")
100%
0%
Fig. 3: Parameterization example
1 Min. level = max. meas. distance
2 Max. level = min. meas. distance
For this adjustment, the distance is entered for min. and max. level.
If these values are not known, an adjustment with distances, for
example, of 10 % and 90 % is also possible. Starting point for these
distance specifications is always the seal surface of the flange.
1. In the menu "
Additional settings
", menu item "
Damping
" you have
to adjust the requested damping of the output signal.
2. Select the output characteristics in the menu item "
Current out
-
put
".
The quick start is then finished. For further information see chapter
"
Set up with PACTware
".
Further steps
