Trademark Patent Copyright
Support
Email: support@vegepod.com.au
Phone: 1800 428 431
Assembly Instructions
Vegecover - Medium
.
IMPORTANT
** Ensure longer ends of arch poles are at bottom
*** Assemble on a hard surface
Ensure all pieces are fully inserted into plastic connectors. Lay the
frame on its side using the ground to gain more leverage, you may even tap
lightly with a mallet or hammer.
To check if they are fully inserted place the frame on top of the assembled
Vegepod, the frame should sit directly over the ‘hinge clips’ or 10mm smaller
than top rim of Vegepod.
