Remote control instructions
Description
of
controls
Rear panel instructions
*Image diagram, for reference only
*Image diagram, for reference only
*Image diagram, for reference only
1. Mute
2. Song serial number
3. Input selection
4. The
5. Next
6. The volume -
7. Sound field effect
8. Next file
9. Previous file
10.Recording
11. Play the record
12. PREV
13. Play/Pause
14. The light switch
15. Repeat
Guitar
USB/TF
Microphone controls and basic operation
Guitar jack: Connect guitar.
Guitar Volume: Adjust the guitar volume.
1. The TF interface
2. Bass volume
3. The USB interface
4. Treble volume
5. Audio output
6. Audio input
7. Adjust microphone volume
8. Guitar input
9. Echo
10. Microphone 1 input
11. Guitar volume
12. Microphone 2 input
13. Recording/Recording playback
14. PREV
15. Play/pause
16. NEXT
17. Mode selection
18. Light switch
19. Microphone priority
20. Play on loop
21. Adjust volume
22. The screen
1.Under normal circumstances, the remote control should be
used within a range of about 20 feet and 30 degrees from the
remote reception window.
2.When operating the remote control, point the remote
control at the receiver window of the machine. There should
be no obstacles between the remote control and the
machine.
3.If the receiving window is in the position of strong light, the
remote control may fail. In this case, please remove the
machine to avoid direct exposure to strong light.
4.Please don
'
t make both new and old batteries work
together,and regularly check whether the remote control
batteries need to be replaced.
Music files in USB and TF cards should be formatted as FAT32 on the computer.
The order about music play is based on file name,if the music file names are as
"
01
,
02
,
03
"
in sequence.This product will play the file
"
01
"
first.
Copy MP3 or WMA music files to USB/TF cards. It is recommended to delete
unnecessary files and folders to speed up card reading and reduce card reading problems
Recording function
Bluetooth operation
Play function
USB port: insert USB and play music.
TF port: insert TF card and play music.
Supports MP3, WMA, and WAV music formats, outstanding sound performance, high fax
stereo design.
M: to switch external audio, MP3 / Bluetooth functions.
►||
: press this key to pause the music, and press again to continue.
|
◄◄
/
►►
|
: when playing, select the PREVIOUS/NEXT music.
Bluetooth connection method:Turn on the speaker,press the‘M’key on the
speaker panel,and the screen will show ‘BLUE’.Use your phone to connect the
Bluetooth of the speaker.The Bluetooth name is VS-0808.
If the connection fails,please restart the device or the phone and try again.
The use range of the Bluetooth is 32ft in the open area.
1.Power switch
2.AC 90V-240V~
3.Light switch
4.DC 12V IN
1 2
4
3
Risk
of
electric
shock
do
not
open
.
It is a normal phenomenon that the machine is
heated during operation hot
surface
do
not
touch
.
WARNING
1.Microphone on
2.Microphone off
3.Screen
1
2
3
20 f
ee
t
Please insert USB or TF card first and then press
“
●/
►
···
”
into recording
mode. When recording music at the first time, an new file “RECORD" will be
created in the card and all recordings will be saved into the file. These
recording files are automatically named as
“
FILE0000, FILE0001
……”
in
sequence. When recording music, press
“
●/
►
”
to puase it and press again
to continue. Press
“
M
”
or
“
●/
►
”
to quit recording mode.
Please press
“
●/
►
”
into recording-play mode(automatically play the
musics recording before). Usually the machine will play the last recording
music first. Press PREV(
|◄◄
) or NEXT(
►►|
) to select the music. Press
Replay on the remote control to replay music. If you would like to replay single
music or all musics, please press Replay repeatedly.
