Using the scanner
10
En
glish
3. When scanning is completed, the Power and
Status/card indicators will keep blinking for
a while, indicating that the scanner is
processing the image and storing the file
onto the memory card.
Wait until the indicators stop blinking
before inserting and scanning the next
original.
WARNING
:
Insert only one sheet at a time. Insert the next original only when
the previous one is done. Otherwise the scanner will fail to
function normally.
NOTE
:
• Do not remove the memory card or disconnect the power supply
while the indicators are blinking.
• This scanner only supports output images in JPEG (.jpg) format,
and the date/ time attribute will not be added.
• For more information on how this scanner stores the scanned
image files on the memory card, see "Orientation of the original
and scanned image" on page 14.
• If the memory card is near full (lower than 1MB), the Status/card
indicator blinks (see "Indicators" on page 7). Use another card
or delete some files on it if necessary.
4. To turn off the scanner after all originals are
scanned, press and hold the Power button
for 1 second. The power indicator will blink
and then go off.
Now it is OK to disconnect the power and
remove the memory card from the scanner.
Summary of Contents for Renovo Series
Page 6: ...Copyright 4 English Memo...
