background image

Part  Number 54693

Revision C

09/15

WARNING: IMPORTANT SAFETY INSTRUCTIONS

Failure to follow these instructions could cause the driver to lose control of the vehicle 

resulting in a serious accident and serious injury or death.

Read this Manual Before Using Hand Control

This manual contains important procedures and required safety information for operating a vehicle 

equipped with the Veigel Compact II Hand Control.

You must read and understand this entire manual before driving any vehicle that has a hand control

installed.

You must understand and follow all safety instructions in this manual when operating the vehicle.

Unimpaired drivers who drive the vehicle with out using the hand control must also read this manual to 

be able to operate the vehicle safely.

To summarize:

• Read these instructions before driving any vehicle with a hand control
• Follow all instructions 
• Heed all warnings and cautions
• Keep these instructions in the vehicle so they may be read by any vehicle operator 

before use

Must be Installed with Vehicles with Automatic Transmission Only

The Veigel Compact II Hand Control is designed  and indented 

only

for use with automatic transmission

equipped vehicles.  

Must be Professionally Installed

The Veigel Compact II Hand Control  must be installed by a professionally trained technician only.

Service and adjustments must be made by trained maintenance personnel.

Please keep this manual, and the Installation manual that come with the hand control, in your vehicle.  Make

both manuals available for use by service personnel when ever adjustments or repairs are made to the hand

control.

IMPORTANT

Observe and obey all instructions in this manual.  Otherwise, the manufacturer’s warranty will be void.

Veigel cannot accept liability for problems caused by neglect or non-observance of these instructions.

Summary of Contents for COMPACT II

















Reviews: