4
available.
Since Ex product is very special, debugging with power before installation if
humidity) specified in chapter 1.6.
Please use this product in conditions (atmosphere pressure, temperature and
The power must comply with requirements specified in 1.5.
Instruction for operation.
It’s not suggested for users to dismantle this product at will, please follow the
Cautions in service:
Outer hexagon adjustable wrench: 300×36,
1pcs.
2)
Cross screw driver: 6×150,
1pcs;
1)
Other tools in installation:
washers and spring washers; 5×M6 nuts, pcs)
Wall mounting support, universal joint,
optional□ (require: 9×M6×14 screws with flat
6)
F type wrench,
248×16×10, optional□;
5)
CoC, instruction manual (with ATEX cert.), 1pcs
for each;
4)
Stopping plugs,
2pcs;
3)
M6 inner hexagon spanner,
1pcs;
2)
SVEX-T100A
or SVEX-T100B
main set, 1pcs;SVEX-T100
1)
Accessories in packaged product:
2.1.
Cautions before installation
Installation & debugging
2.
Ambient
temperature:
-40ºC~+60ºC.
Yield stress of the
flameproof enclosure fasteners shall be no less than 450MPa;
Width of the flameproof joints are greater than values specified in EN/IEC60079-1;
Engaged length and engaged threads are greater than values in IEC/EN 60079-1;
1.8.
Special conditions for safe use
between wiring terminals and the enclosure; no breakdown or flashover allowed.
terminal and the enclosure for 1min; dielectric test of 50Hz, AC500V shall be conducted
Dielectric strength: dielectric test of 50Hz, AC1500V shall be conducted between power
SVEX-T100
Without
Wiper
/
SVEX-T300
With
Wiper
Explosion-proof
Camera
·
Instruction
Manual