※
The user can view an image on full screen by double-clicking a desired channel in the 4/9/16 Sub-Screen
mode. Double-click any part of the screen to return to the previous mode.
※
Special Mode;
Big / Biggest, Channel Switching
- Front Button and Remote Controller : Press a numeric button to be moved to big/biggest screen.
- Mouse : Double-click on a channel to be moved to big/biggest screen.
※
Auto Sequence
Auto Sequence is to rotate images at an interval of the certain time in 1/4/9 Basic Division and Big/Biggest
Special Mode.
Auto Sequence is not available in the Basic 16 Division mode
.
①
Move to {Menu} {Miscellaneous} {Display Setup } and select a duration time(1-10 seconds).
②
Pressing Front {SELECT} Button / Remote Controller {SELECT} Button / Mouse Arrow Button initiate the
Auto Sequence mode.
.
③
Auto Sequence in Basic 1 / 4 / 9 Division Mode
1 Channel Mode Sequence
4 Channel Mode Sequence
9 Channel Mode Sequence
④
Auto Sequence in Special Big Division Mode (same application in Biggest Mode)
(It is only avaiabel when mutilple cameras are connected.)
５
-
３
-
２
Channel Grouping
Channel Grouping is to switch the image location in the screen between channels in the monitoring mode.
①
On the real-time monitoring screen, select {Menu} {Miscellaneous} {Channel Grouping}.
②
Select a channel to be switched after moving a yellow-focused selection window.
③
Select a channel to be switched when the window shows.
④
The Image location of the each channel is changed.
※
Grouping is not supported for the 1 Channel Division mode.
※
The user can drag the focused channel and drop on the desired channel to switch the loca-
tion by using a mouse. Also dragging the unfocused channel and dropping on the focused chan-
nel is available.
※
Changing the screen division mode causes other division modes to be changed as well.
※
This is only available in the Basic 1/4/9/16 Division mode and not available in the Special
Big/Biggest Division mode.
５
-
３
-
３
Spot
Spot is to output a channel that is set with a certain function and Spot has an independent monitor and output.
The priority for Spot is Manual Spot > Event Spot > Sequence Spot.
①
Manual Spot
The user can designate a spot channel manually.
SVR-1648D1 supports 4ea Spot channels
25
