Selecting the right-mouse button or menu button in the Playback Mode pops up the
{Playback Menu}
as shown
below.
[Figure 5-27. Playback Menu]
５
-
８
-
２
Smart Search
This function is used to search an image with the object movement at a specific zone quickly. Searching by each
channel and a detail control are available.
Type
Content
Sensitivity
5 levels; Lowest / Low / Middle / High / Highest
Minimum
Mosaic pixel control available between 1- 10
In the NTSC mode, search 30 frames once.
Quick Search
In the PAL mode, search 25 frames once.
Detail Search
Search all frames.
①
Move to the Smart Search and select the desired channel.
②
After shifting to the 1 channel mode, select areas to be smart searched.
[Figure 5-28. Smart Search Area Designation]
③
The 32 * 24 pixel mosaic mode appears. In the beginning, all pixels are selected. Designate an area by
left-click and drag the pixel mosaic pointer(deep yellow). Designate another area by repeating the same
way.
It detects motions in non-designated blocks.
④
Right-click brings up the menu as shown below. Configure each category and press the Playback button to
start searching.
34
