①
Move to {Menu} {Setup} {System} {2. Remote Controller ID}.
②
In the selection window, enter ID by using the arrow keys and the Select button (the number 0~99 is
available for ID.)
If you forget the DVR ID, set the remote controller ID to 999 to start the DVR. Note, however,
that the DVR ID should be the same as the remote controller ID.
※
To configure Remote Controller ID
(Example: ID setting as 3)
1) Press {ID} button on the remote controller.
2) Press the {0} key and {3} key.
3) Press {ID} button again.
4) Remote Controller ID is set as 3.
６
-
７
-
３
ID For Keyboard Controller
①
Move to {Menu} {Setup} {System} {3. ID for Key Controller.
②
In the selection window, enter ID by using the arrow keys and the Select button (the number 1~255 is
available for ID.)
６
-
７
-
４
User Registration
※
Add, edit, or delete the users who will operate the system and give authorities to users as shown below.
System Access Authorization
Network Live
View the real-time images upon network access.
Playback
View the recorded images.
Copy (download)
Copy and download files.
PTZ camera
PTZ camera control
Recording, schedule, system, storage, Time, PTZ,
Setup
network, Screen setup
Network Upgrade
Remote network upgrade
Covert channel monitoring
View the covert channel in the network.
Up to 4 users can be registered. Letters for ID and Password can be entered up to
30.
６
-
７
-
５
Admin. Password
Setup the Administrator Password. The password can hold up to five digits.
６
-
７
-
６
Upgrade
The firmware and menu setting of the product can be easily upgraded through the use of the external storage
devices or portable storage devices with USB 2.0 port.
※
Find and copy the upgrade file to the highest folder in the external storage device or portable stor
-
age device supporting USB 2.0
.
※
Connect the storage device with an upgrade file stored to USB 2.0 port at Right front panel
.
56
