Veilux VR-412D1 & VR-412C Compact DVR’s
www.veilux.net
1
Operating Instruction & User’s Guide
FCC Compliance Statement
Model Name:
VR-412C / VR-412D1
This device complies with Part 15 of the FCC Rules. Operation is Subject to the following two conductions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operations
WARNING
Unauthorized reproduction of all or part of this manual is strictly prohibited.
The figures in this manual are for illustration purposes only (may differ from the actual product).
The specifications and design of the product are subject to change without prior notice for purposes of
quality improvement.
CAUTIONS
To get the best use out of the product, be sure to read the cautions before using the product. For safety,
please take note of the following.
Instructions before using the product
1
To prevent electric shock when installing, moving, or opening the DVR and peripheral devices, connect
and disconnect the cables as instructed. All cables must be connected to grounded power outlets.
2
If the product is installed near a power outlet, make sure it can be unplugged easily.
3
Do not use the DVR in water or in wet places.
4
Keep the vinyl packing materials used for the DVR or other peripheral devices out of reach of children
(may cause suffocation).
Installation Environment of the DVR
1
Maintain the following conditions: operating temperature of 0˚C ~ 30˚C; operating humidity of 10% ~
80%.
2
Install the DVR in a safe place that is free from external vibration.
3
Install the DVR in a well-ventilated place.
4
To protect the hard disk from data loss and breakdown, install the DVR away from magnetic materials.
5
When using a rack other than the standard one, use a separate table with sufficient spacing, i.e., 60cm
from the floor, 50cm from the ceiling, and 20cm from the side and back walls and other objects.
Safety Notes on the DVR
1
When installing additional boards and HDDs, separate the power cable and turn OFF power
supplied to the DVR completely.
2
Keep the product away from heat-generating devices such as heaters.
3
Do not use a damaged power cord.
4
To prevent problems due to magnetic interference and electric surge, use only grounded
cables and power outlets.
5
If the power cord is connected, do not touch the power unit (if the power cord is connected,
electric current is still flowing internally even after the switch is turned OFF).
Summary of Contents for VR-412D1
Page 1: ... ...
