Automatic positioning of carriage
Enables or disables automatic carriage positioning.
If automatic carriage positioning is enabled, the carriage moves down
after the collar clamp was closed until the hem edge of the garment to
be finished has been detected.
Enable simple menu
Sets whether the simplified menu can be selected in operating mode
in addition to the extended menu (standard).
Automatic shoulder in
Sets whether the automatic swivel shoulder in function is enabled or
disabled.
If the automatic swivel shoulder in function is enabled, the shoulder
swivels in after completion of the finishing cycle.
Tab. 12: Setup menu for eMotion
Designation
Function
Option condensate system
Enables or disables the automatic function of the optionally available
software-controlled condensate draining system.
Option moisture control
Enables or disables the automatic function of the optionally available
residual moisture control option. It is used to automatically detect the
drying degree of the garment.
Tolerance time
(with residual moisture control
option only)
If the residual moisture control option is enabled, the tolerance time
can be set here in the range 0 - 10 seconds.
To determine the drying degree of the garment, the change in residual
moisture is considered within an automatically calculated tolerance
time plus a variable tolerance time (can be set between 0 - 10 sec-
onds). After the total tolerance time has elapsed, the systems stops
drying the garment automatically. The higher the preset value for the
drying time in the menu, the dryer the garment.
Depending o the steam power/steam quality, VEIT GmbH recom-
mends a tolerance time of 0 - 5 seconds.
Minimum drying time
(with residual moisture control
option only)
The minimum drying time specifies how long the garment will be at
least dried when the residual moisture control option is activated. This
time is independent of the drying degree of the garment.
The minimum drying time can be set in the range 0 - 30 seconds.
By default upon delivery, it is set to 20 seconds.
Message max. air time reached
(with residual moisture control
option only)
If the residual moisture control option is enabled, the maximum drying
time reached message can be activated or deactivated here.
If the function is enabled, the drying process is stopped after a time of
20 - 250 seconds has elapsed independent of the current residual
moisture.
Option save energy
Enables or disables the eMotion save energy option.
If the option is enabled, the shirt finisher switches to energy-saving
mode if it is not operated for a longer period of time (if the time set has
elapsed).
Operation
Controls and indicators > Control panel
18.07.2017
Shirt finisher VEIT SF26
61
Summary of Contents for SF26
