4.3 Operating and maintenance personnel
All persons (operating and maintenance personnel only) who are
involved in setting up, installing, commissioning, operating or main-
taining the machine must act safely when handling the machine.
This applies in the following cases:
n
The machine is operated, serviced and maintained by trained
and authorised persons. Personnel who are to be trained,
instructed or those who are undergoing general training are
only allowed to work on the machine under the constant super-
vision of an experienced person.
n
Responsibility for operating the machine is clearly defined and
adhered to when being operated by several persons in order to
avoid uncertain competences with regard to safety.
n
Shutdown procedures referred to in the operating instructions
are always observed during work on the machine (operation,
maintenance, repair, etc.).
n
Unauthorised people are kept away from the working area of
the machine.
n
Compliance with safety-conscious and risk-conscious work as
described in the operating instructions is checked on a regular
basis.
n
The operating company only operates the machine while in
proper working order.
n
In case of malfunctions, the machine is stopped and locked
immediately. The relevant department/person has to be
informed and the fault has to be remedied immediately by the
responsible department.
n
The operator immediately informs the responsible department/
person about any changes on the machine which might impair
safety.
4.4 Shutdown procedures
CAUTION!
Before starting cleaning, maintenance or repair
work (by qualified personnel only), the following
shutdown procedure must be observed.
Disregarding these procedures presents a risk of
death or injury of the personnel.
1.
Cutting off the steam supply and condensate return line
n
Shut off the valve for steam supply and condensate
return line.
n
Depressurise the steam system by pressing the steam
button on the control panel.
n
Make sure that no steam emerges from the machine.
n
Make sure that the machine has cooled down.
Potential dangers
Shutdown procedures
18.07.2017
Shirt finisher VEIT SF26
28
Summary of Contents for SF26
